2024

International Journal papers:

  1. Esfanjani, P., Mahmoudi, A., Rashidi, S. and Valipour, M.S., 2024. Experimental investigation of a novel design of cavity receiver for a parabolic dish collector humidification-dehumidification desalination system. Energy Conversion and Management299, p.117845.
  2. Jahangiri, S., Alhamzawi, A., Esfanjani, P., Valipour, M.S. and Akbarzadeh, S., 2024. Impact of double-axis tracking on thermal performance of the linear Fresnel Collector: An experimental study. Solar Energy272, p.112483.
  3. Esfanjani, P., Jahangiri, S., Mahmoudi, A., Rashidi, S. and Valipour, M.S., 2024. Optical and thermal performance enhancement of parabolic dish collector: Effects of cavity receiver's surface modification and covering aperture. International Communications in Heat and Mass Transfer155, p.107540.

2023

International Journal papers:

  1. Esfanjani, P., Mahmoudi, A., Valipour, M.S. and Rashidi, S., 2023. An experimental study on a cylindrical-conical cavity receiver for the parabolic dish collector. Environmental Science and Pollution Research30(3), pp.6517-6529.
  2. Esmaeili, Z., Akbarzadeh, S., Rashidi, S. and Valipour, M.S., 2023. Effects of hybrid nanofluids and turbulator on efficiency improvement of parabolic trough solar collectors. Engineering Analysis with Boundary Elements148, pp.114-125.
  3. Mirzaee, H., Rafee, R., Rashidi, S. and Valipour, M.S., 2023. Two-phase modeling of low-Reynolds turbulent heat convection of Al2O3-water nanofluid in a 2-D helically corrugated channel. Chemical Engineering Communications210(4), pp.634-654.
  4. Lorestani, H.Z. and Valipour, M.S., 2023. Numerical investigation of a sloped solar chimney power plant: a three-dimensional study. Chemical Engineering Communications210(5), pp.756-772.
  5. Alaei, M.N. and Valipour, M.S., 2023. Experimental study of optimized beginner-level wingsuit. Archive of Applied Mechanics93(6), pp.2253-2272.
  6. Zare Ghadi, A., Radfar, N., Valipour, M.S. and Sohn, H.Y., 2023. A Review on the Modeling of Direct Reduction of Iron Oxides in Gas‐Based Shaft Furnaces. steel research international94(6), p.2200742.
  7. Esmaeili, Z., Valipour, M.S., Rashidi, S. and Akbarzadeh, S., 2023. Performance analysis of a parabolic trough collector using partial metal foam inside an absorber tube: an experimental study. Environmental Science and Pollution Research, pp.1-11.
  8. Mahmoudi, A., Bostani, M., Rashidi, S. and Valipour, M.S., 2023. Challenges and opportunities of desalination with renewable energy resources in Middle East countries. Renewable and Sustainable Energy Reviews184, p.113543.
  9. Sandooghdar, S., Akbarzadeh, S., Valipour, M.S. and Arabkoohsar, A., 2023. Performance improvement of air-based solar photovoltaic/thermal collectors using wavy channels. Renewable Energy211, pp.831-845.

2022

International Journal papers:

  1. Esfanjani, P., Jahangiri, S., Heidarian, A., Valipour, M.S. and Rashidi, S., 2022. A review on solar-powered cooling systems coupled with parabolic dish collector and linear Fresnel reflector. Environmental Science and Pollution Research, pp.1-31.
  2. Tabe, R., Rafee, R., Valipour, M.S. and Ahmadi, G., 2022.Transition And Laminar Flows in A Realistic Geometry of Human Upper AirwayJournal of Mechanics in Medicine and Biology22(01), p.2150070.
  3. Aboujafari, M., Valipour, M.S., Hajialimohammadi, A. and Honnery, D., 2022. Porous Medium Applications in Internal Combustion Engines: A Review. Transport in Porous Media, pp.1-26.
  4. Fallah, S.H. and Valipour, M.S., 2022. Numerical investigation of a small scale sloped solar chimney power plant. Renewable Energy183, pp.1-11.
  5. Esmaili, M.M., Fallah, S.H., Izanlu, M. and Valipour, M.S., 2022. Investigation on the Performance of a solar chimney-flare gas hybrid system. Sustainable Energy Technologies and Assessments52, p.102279.

2021

International Journal papers:

  1. Lorestani, H.Z. and Valipour, M.S., 2021. Numerical investigation of a sloped solar chimney power plant: a three-dimensional study. Chemical Engineering Communications, pp.1-17.
  2. Mirzaee, H., Rafee, R., Rashidi, S. and Valipour, M.S., 2021. Two-phase modeling of low-Reynolds turbulent heat convection of Al2O3-water nanofluid in a 2-D helically corrugated channel. Chemical Engineering Communications, pp.1-21.
  3. Babapour, M., Akbarzadeh, S. and Valipour, M.S., 2021. An experimental investigation on the simultaneous effects of helically corrugated receiver and nanofluids in a parabolic trough collector. Journal of the Taiwan Institute of Chemical Engineers128, pp.261-275.
  4. Sakhaei, S.A. and Valipour, M.S., 2021. Thermal behavior of a flat plate solar collector with simultaneous use of helically heat collecting tubes and phase change materials. Sustainable Energy Technologies and Assessments46, p.101279.
  5. Najjaran, S., Rashidi, S. and Valipour, M.S., 2021. An entropy production analysis for electroosmotic flow and convective heat transfer: a numerical investigation. Journal of Thermal Analysis and Calorimetry145(4), pp.1877-1889.
  6. Najjaran, S., Rashidi, S. and Valipour, M.S., 2021. Heat transfer intensification in microchannel by induced-charge electrokinetic phenomenon: a numerical study. Journal of Thermal Analysis and Calorimetry145(4), pp.1849-1861.
  7. Heidarian, A., Rafee, R. and Valipour, M.S., 2021. Hydrodynamic analysis of the nanofluids flow in a microchannel with hydrophobic and superhydrophobic surfaces. Journal of the Taiwan Institute of Chemical Engineers124, pp.266-275.
  8. Pahamli, Y. and Valipour, M.S., 2021. Application of phase change materials in refrigerator and freezer appliances: A comprehensive review. Journal of Heat and Mass Transfer Research8(1), pp.87-104.
  9. Mirakhorlo, M., Rajabi Zargarabadi, M. and Valipour, M.S., 2021. Experimental investigation of cooling photovoltaic panels using phase change material at different angles.
  10. Akbarzadeh, S. and Valipour, M.S., 2021. The thermo-hydraulic performance of a parabolic trough collector with helically corrugated tube. Sustainable Energy Technologies and Assessments44, p.101013.
  11. Tabe, R., Rafee, R., Valipour, M.S. and Ahmadi, G., 2021. Investigation of airflow at different activity conditions in a realistic model of human upper respiratory tract. Computer Methods in Biomechanics and Biomedical Engineering24(2), pp.173-187.

2020

International Journal papers:

  1. Sakhaei, S.A. and Valipour, M.S., 2020. Thermal performance analysis of a flat plate solar collector by utilizing helically corrugated risers: An experimental study. Solar Energy207, pp.235-246.
  2. Mousazade, A., Rafee, R. and Valipour, M.S., 2020. Thermal performance of cold panels with phase change materials in a refrigerated truck. International Journal of Refrigeration120, pp.119-126.
  3. Khanzadeh Borjak, S., Rafee, R. and Valipour, M.S., 2020. Experimental investigation of water droplet impact on the electrospun superhydrophobic cylindrical glass: contact time, maximum spreading factor, and splash threshold. Langmuir36(45), pp.13498-13508.
  4. Fattahi, A., Dehghan, M. and Valipour, M.S., 2020. Heat transfer in a three-dimensional nanofluid-cooled microcooler under the influence of magnetic field. Journal of Mechanical Engineering50(3), pp.165-173.
  5. Tabe, R., Rafee, R., Valipour, M.S. and Ahmadi, G., 2020. Modeling the Transient Absorption of Particulate Drugs in the Human Upper Airways. Journal of Heat and Mass Transfer Research7(2), pp.177-191.
  6. Heidarian, A., Rafee, R. and Valipour, M.S., 2020. Effects of wall hydrophobicity on the thermohydraulic performance of the microchannels with nanofluids. International Communications in Heat and Mass Transfer117, p.104758.
  7. Akbarzadeh, S. and Valipour, M.S., 2020. Energy and exergy analysis of a parabolic trough collector using helically corrugated absorber tube. Renewable Energy155, pp.735-747.
  8. Borjak, S.K., Rafee, R. and Valipour, M.S., 2020. Fabrication of Poly Vinyl Acetate (PVAc) Nanofibers Using DMAC Solvent: Effect of Molecular Weight, Optimization by Taguchi DoE. International Polymer Processing35(3), pp.257-267.
  9. Najjaran, S., Rashidi, S. and Valipour, M.S., 2020. A new design of induced-charge electrokinetic micromixer with corrugated walls and conductive plate installation. International Communications in Heat and Mass Transfer114, p.104564.
  10. Akbarzadeh, S. and Valipour, M.S., 2020. Experimental study on the heat transfer enhancement in helically corrugated tubes under the non-uniform heat flux. Journal of Thermal Analysis and Calorimetry140(3), pp.1611-1623.
  11. Amani, K., Ebrahimpour, M., Akbarzadeh, S. and Valipour, M.S., 2020. The utilization of conical strip inserts in a parabolic trough collector. Journal of Thermal Analysis and Calorimetry140(3), pp.1625-1631.
  12. Sakhaei, S.A. and Valipour, M.S., 2020. Investigation on the effect of different coated absorber plates on the thermal efficiency of the flat-plate solar collector. Journal of Thermal Analysis and Calorimetry140(3), pp.1597-1610.
  13. Zare Ghadi, A., Valipour, M.S., Vahedi, S.M. and Sohn, H.Y., 2020. A review on the modeling of gaseous reduction of iron oxide pellets. steel research international91(1), p.1900270.

2019

International Journal papers:

  1. Vahedi, S.M., Valipour, M.S. and De Monte, F., 2019. An advection-diffusion multi-layer porous model for stent drug delivery in coronary arteries. Journal of Computational & Applied Research in Mechanical Engineering (JCARME)9(1), pp.1-18.
  2. Rahmani, H., Biglari, M., Valipour, M.S. and Lari, K., 2019. Numerical investigation of the effects of immersion on the efficiency of a tidal helical turbine. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science233(12), pp.4299-4310.
  3. Fallah, S.H. and Valipour, M.S., 2019. Evaluation of solar chimney power plant performance: the effect of artificial roughness of collector. Solar Energy188, pp.175-184.
  4. Sakhaei, S.A. and Valipour, M.S., 2019. Performance enhancement analysis of the flat plate collectors: a comprehensive review. Renewable and Sustainable Energy Reviews102, pp.186-204.
  5. Tayebi, R., Akbarzadeh, S. and Valipour, M.S., 2019. Numerical investigation of efficiency enhancement in a direct absorption parabolic trough collector occupied by a porous medium and saturated by a nanofluid. Environmental Progress & Sustainable Energy38(2), pp.727-740.

2018

International Journal papers:

  1. Vahedi, S.M., Ghadi, A.Z. and Valipour, M.S., 2018. Application of response surface methodology in the optimization of magneto-hydrodynamic flow around and through a porous circular cylinder. Journal of Mechanics34(5), pp.695-710.
  2. Rahmani, H., Biglari, M., Valipour, M.S. and Lari, K., 2018. Assessment of the numerical and experimental performance of screw tidal turbines. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy232(7), pp.912-925.
  3. Akbarzadeh, S. and Valipour, M.S., 2018. Heat transfer enhancement in parabolic trough collectors: A comprehensive review. Renewable and Sustainable Energy Reviews92, pp.198-218.
  4. Dehghan, M., Daneshipour, M. and Valipour, M.S., 2018. Nanofluids and converging flow passages: A synergetic conjugate-heat-transfer enhancement of micro heat sinks. International Communications in Heat and Mass Transfer97, pp.72-77.
  5. Fallah, S.H. and Valipour, M.S., 2018. A Mathematical modeling and optimization of solar chimney power plant by SA and PSO algorithm. Journal of Modeling in Engineering16(53), pp.75-87.
  6. Rashidi, S., Bafekr, H., Valipour, M.S. and Esfahani, J.A., 2018. A review on the application, simulation, and experiment of the electrokinetic mixers. Chemical Engineering and Processing-Process Intensification126, pp.108-122.
  7. Zare Ghadi, A., Valipour, M.S. and Biglari, M., 2018. Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron. International Journal of Engineering31(8), pp.1274-1282.
  8. Dehghan, M., Tirandaz, N. and Valipour, M.S., 2018. Porous-filled helical double-pipe heat exchanger under asymmetric heat flux. Journal of Modeling in Engineering16(52), pp.409-418.
  9. Rashidi, S., Rahbar, N., Valipour, M.S. and Esfahani, J.A., 2018. Enhancement of solar still by reticular porous media: experimental investigation with exergy and economic analysis. Applied Thermal Engineering130, pp.1341-1348.
  10. Zare Ghadi, A., Valipour, M.S. and Biglari, M., 2018. Transient Entropy Generation Analysis During Wustite Pellet Reduction to Sponge Iron. International Journal of Engineering31(8), pp.1274-1282.

2017

International Journal papers:

  1.  M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2. Bakhshipour, S., Valipour, M.S. and Pahamli, Y., 2017. Parametric analysis of domestic refrigerators using PCM heat exchanger. International journal of refrigeration83, pp.1-13.

  3.  M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media.

  4.  M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  5.  M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  6.  M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

2016

International Journal papers:

  1. M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2.  M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media.

  3.  M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  4.  M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  5.  M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

2015

International Journal papers:

  1.  M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2.  M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media.

  3.  M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  4.  M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  5. M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

2014

International Journal papers:

  1.  S. Rashidi, A. Nouri-Borujerdi, M.S. Valipour, R. Ellahi, I. Pop, “Stress-jump and Continuity Interface Conditions for a Cylinder Embedded in a Porous Medium”, Transport in Porous Media, [DOI 10.1007/s11242-014-0431-3].

  2.  M.M. Zolfagharian, M. Rajabi-Zargarabadi, A.S. Mujumdar, M.S. Valipour and M. Asadollahi, “Optimization of Turbine Blade Cooling Using Combined Cooling Techniques”, Engineering Applications of Computational Fluid Mechanics, 8(2014),462-475.

  3.  M. Bovand, M.S. Valipour, K. Dincer, S. Eiamsa-ard, “Application of Response Surface Methodology to optimization of a standard RanqueeHilsch vortex tube refrigerator”, Applied Thermal Engineering 67 (2014) 545-553.

  4.  S. Rashidi, R. Masoodi, M. Bovand, M.S. Valipour, “Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angles”, International Journal of Numerical Methods for Heat & Fluid Flow, 2014, OnLine-First.

  5.  M. Bovand, M. S. Valipour, K. Dincer, A.Tamayol, " Numerical analysis of the curvature effects on Ranque-Hilsch vortex tube refrigerators", J. ofanalysis for curved vortex tube optimization”, Int. Commun. Heat Mass Transf., 50 (2014) 98–107.

  6.  S. Rashidi, M. Bovand, I. Pop and· M. S. Valipour, “Numerical Simulation of Forced Convective Heat Transfer Past a Square Diamond-Shaped Porous Cylinder”, Transport in Porous Media.

2013

International Journal papers:

  1.  M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2. M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media.

  3.  S. Rashidi, A. Nouri-Borujerdi, M.S. Valipour, R. Ellahi, I. Pop, “Stress-jump and Continuity Interface Conditions for a Cylinder Embedded in a Porous Medium”, Transport in Porous Media.

  4. M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  5.  M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  6.  M.M. Zolfagharian, M. Rajabi-Zargarabadi, A.S. Mujumdar, M.S. Valipour and M. Asadollahi, “Optimization of Turbine Blade Cooling Using Combined Cooling Techniques”, Engineering Applications of Computational Fluid Mechanics, 8(2014),462-475.

  7.  M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

  8.  M. Bovand, M.S. Valipour, K. Dincer, S. Eiamsa-ard, “Application of Response Surface Methodology to optimization of a standard RanqueeHilsch vortex tube refrigerator”, Applied Thermal Engineering 67 (2014) 545-553.

  9.  S. Rashidi, R. Masoodi, M. Bovand, M.S. Valipour, “Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angles”, International Journal of Numerical Methods for Heat & Fluid Flow, 2014, OnLine-First.

  10.  M.S. Valipour, S. Rashidi, M. Bovanda, R. Masoodi " Numerical modeling of flow around and through a porous cylinder with diamond cross-section", European Journal of Mechanics / B Fluids, 46, 74-81.

  11.  M. Bovand, M. S. Valipour, K. Dincer, A.Tamayol, " Numerical analysis of the curvature effects on Ranque-Hilsch vortex tube refrigerators", J. ofanalysis for curved vortex tube optimization”, Int. Commun. Heat Mass Transf., 50 (2014) 98–107.

  12. M. Dehghan, M.S. Valipour, S. Saedodin, “Perturbation Analysis of the Local Thermal Non-equilibrium Condition in a Fluid-Saturated Porous Medium Bounded by an Iso-thermal Channel”, Transport in Porous Media.

  13. 14. M.S. Valipour, S. Rashidi, R. Masoodi,“ Magnetohydrodynamics Flow and Heat Transfer Around a Solid Cylinder Wrapped With a Porous Ring”, J. Heat Transfer - Transaction ASME.

  14. 15. S. Rashidi, M. Bovand, I. Pop and· M. S. Valipour, “Numerical Simulation of Forced Convective Heat Transfer Past a Square Diamond-Shaped Porous Cylinder”, Transport in Porous Media.

  15.  M. Biglari, M.S. Valipour, E. Assareh, M. Nedaei, I. Poultangari “A New Solution for Natural Convection of Darcian Fluid about aVertical Full Cone Embedded in Porous Media Prescribed Wall Temperature” Global Journal of Science, Engineering and Technology (ISSN: 2322-2441)Issue 11, 2013, pp. 10-18

  16. M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand ,“Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angels”, International Journal of Numerical Methods for Heat and Fluid Flow , Accepted.

  17. M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand, M. Mirhosseini, “A numerical study on convection around a square cylinder using AL2O3–H2O nanofluid”, Journal of Thermal Science, 2013, OnLine-First.

  18.  S. Rashidi, A.Tamayol, M.S.Valipour, N.Shokri, “Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring”, International Journal of Heat and Mass Transfer, 63 (2013) 91–100.

  19.  Rahbar N., Taherian M., Shateri M., Valipour M.S., “Numerical investigation on flow behavior and energy separation in a micro-scale vortex tube”, Thermal Science 2012 OnLine-First, 

  20.  Ghadi A.Z., Goodarzian H., Gorji-Bandpy M., Valipour M.S. “Numerical Investigation of Magnetic Effect on Forced Convection around Two-Dimensional Circular Cylinder Embedded in Porous Media”, Engineering Applications of Computational Fluid Mechanics, 6(3), 395-402.

  21. Valipour M.S., Ghadi A.Z., “Numerical Investigation of Forced Convective Heat Transfer around and through a Porous Circular Cylinder with Internal Heat Generation ”, J. Heat Transfer - Transaction ASME, 134(6).

  22.  M.S. Valipour, M.H. Mokhtari, “Effect of Water Gas Shift Reaction on the Non-Isothermal Reduction of Wustite Porous Pellet Using Syngas”, International Journal of ISSI, 8 (2011), 9-15.

  23. Valipour M.S., Ghadi A.Z., “Numerical investigation of fluid flow and heat transfer around solid circular cylinder utilizing nanofluid”, Int. Commun. Heat Mass Transf., 2011, 38(9), 1296-1304.

  24.  Valipour M.S., Niazi, N., “Experimental modeling of a curved Ranque-Hilsch vortex tube refrigerator”, International Journal of Refrigeration, 2011, 34(4), 1109-1116.

  25.  Valipour M.S. “Mathematical Modelling of a Non-catalytic Gas-Solid Reaction: The Hematite Pellet Reduction with Syngas” Scientia Iranica, Transactions C : Chemistry and Chemical Engineering, 2009, 16, 108-124.

  26.  Khoshandam, B., Kumar, R. V., Valipour, M. S. and Darzi, H. R., "Modeling of non-catalytic gas-solid reactions-Multicomponent nonequimolar counter-diffusion of gaseous phase", Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy 118 (2), pp. 85-97.

  27. Valipour M.S. and Khoshandam B., “Numerical Modeling of Non-isothermal Reduction of a wustite Pellet with Syngas”, Ironmaking and Steelmaking, 36, 91-96, 2009.

  28.  Valipour M.S. and Saboohi Y., “Numerical Investigation of Nonisothermal Reduction of Hematite Using Syngas: The Shaft Scale Study” Modelling and Simulation in Material Science and Engineering, 15, 487-507, 2007.

  29. Valipour M.S. and Saboohi Y., “Modeling of Multiple Noncatalytic Gas- Solid Reactions in a Moving Bed of Porous Pellets Based on Finite Volume Method” Heat and Mass Transfer, 43, 881-894, 2007.

  30. Valipour M.S., Motamed Hashemi M.Y. and Saboohi Y., “Mathematical Modeling of Reaction in an Iron Ore Pellet With Using a Mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: An isothermal study” Advanced Powder Technology, 17(3), 277-295, 2006.

     Valipour M.S. and Saboohi Y., "A non-isothermal, transient model of a non-catalytic reaction in a packed bed with a multi-component high temperature gas mixture" in Computational Fluid and Solid Mechanics 2005(Ed: K.J. Bathe), Elsevier Ltd., pp.1023-1025, 2005.

    Saidi, M.H. and Valipour, M.S., "Experimental Modeling of Vortex Tube Refrigerator", J. of Applied Thermal Engineering, Vol.23, pp.1971-1980, 2003.

2012

International Journal papers:

  1.  M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2.  M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media.

  3.  S. Rashidi, A. Nouri-Borujerdi, M.S. Valipour, R. Ellahi, I. Pop, “Stress-jump and Continuity Interface Conditions for a Cylinder Embedded in a Porous Medium”, Transport in Porous Media.

  4.  M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  5. M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  6.  M.M. Zolfagharian, M. Rajabi-Zargarabadi, A.S. Mujumdar, M.S. Valipour and M. Asadollahi, “Optimization of Turbine Blade Cooling Using Combined Cooling Techniques”, Engineering Applications of Computational Fluid Mechanics, 8(2014),462-475.

  7.  M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

  8. M. Bovand, M.S. Valipour, K. Dincer, S. Eiamsa-ard, “Application of Response Surface Methodology to optimization of a standard RanqueeHilsch vortex tube refrigerator”, Applied Thermal Engineering 67 (2014) 545-553.

  9. S. Rashidi, R. Masoodi, M. Bovand, M.S. Valipour, “Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angles”, International Journal of Numerical Methods for Heat & Fluid Flow, 2014, OnLine-First.

  10.  M.S. Valipour, S. Rashidi, M. Bovanda, R. Masoodi " Numerical modeling of flow around and through a porous cylinder with diamond cross-section", European Journal of Mechanics / B Fluids, 46, 74-81.

  11. M. Bovand, M. S. Valipour, K. Dincer, A.Tamayol, " Numerical analysis of the curvature effects on Ranque-Hilsch vortex tube refrigerators", J. of analysis for curved vortex tube optimization”, Int. Commun. Heat Mass Transf., 50 (2014) 98–107.

  12. 13. M. Dehghan, M.S. Valipour, S. Saedodin, “Perturbation Analysis of the Local Thermal Non-equilibrium Condition in a Fluid-Saturated Porous Medium Bounded by an Iso-thermal Channel”, Transport in Porous Media.

  13.  M.S. Valipour, S. Rashidi, R. Masoodi,“ Magnetohydrodynamics Flow and Heat Transfer Around a Solid Cylinder Wrapped With a Porous Ring”, J. Heat Transfer - Transaction ASME, [DOI: 10.1115/1.4026371].

  14.  S. Rashidi, M. Bovand, I. Pop and· M. S. Valipour, “Numerical Simulation of Forced Convective Heat Transfer Past a Square Diamond-Shaped Porous Cylinder”, Transport in Porous Media, DOI 10.1007/s11242-014-0272-0,

  15.  M. Biglari, M.S. Valipour, E. Assareh, M. Nedaei, I. Poultangari “A New Solution for Natural Convection of Darcian Fluid about aVertical Full Cone Embedded in Porous Media Prescribed Wall Temperature” Global Journal of Science, Engineering and Technology (ISSN: 2322-2441)Issue 11, 2013, pp. 10-18

  16. M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand ,“Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angels”, International Journal of Numerical Methods for Heat and Fluid Flow , Accepted.

  17. M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand, M. Mirhosseini, “A numerical study on convection around a square cylinder using AL2O3–H2O nanofluid”, Journal of Thermal Science, 2013, OnLine-First.

  18. 19. S. Rashidi, A.Tamayol, M.S.Valipour, N.Shokri, “Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring”, International Journal of Heat and Mass Transfer, 63 (2013) 91–100.

  19.  Rahbar N., Taherian M., Shateri M., Valipour M.S., “Numerical investigation on flow behavior and energy separation in a micro-scale vortex tube”, Thermal Science 2012 OnLine-First, 

  20.  Ghadi A.Z., Goodarzian H., Gorji-Bandpy M., Valipour M.S. “Numerical Investigation of Magnetic Effect on Forced Convection around Two-Dimensional Circular Cylinder Embedded in Porous Media”, Engineering Applications of Computational Fluid Mechanics, 6(3), 395-402.

  21.  Valipour M.S., Ghadi A.Z., “Numerical Investigation of Forced Convective Heat Transfer around and through a Porous Circular Cylinder with Internal Heat Generation ”, J. Heat Transfer - Transaction ASME, 134(6).

  22.  M.S. Valipour, M.H. Mokhtari, “Effect of Water Gas Shift Reaction on the Non-Isothermal Reduction of Wustite Porous Pellet Using Syngas”, International Journal of ISSI, 8 (2011), 9-15.

  23. Valipour M.S., Ghadi A.Z., “Numerical investigation of fluid flow and heat transfer around solid circular cylinder utilizing nanofluid”, Int. Commun. Heat Mass Transf., 2011, 38(9), 1296-1304.

  24.  Valipour M.S., Niazi, N., “Experimental modeling of a curved Ranque-Hilsch vortex tube refrigerator”, International Journal of Refrigeration, 2011, 34(4), 1109-1116.

  25. Valipour M.S. “Mathematical Modelling of a Non-catalytic Gas-Solid Reaction: The Hematite Pellet Reduction with Syngas” Scientia Iranica, Transactions C : Chemistry and Chemical Engineering, 2009, 16, 108-124.

  26.  Khoshandam, B., Kumar, R. V., Valipour, M. S. and Darzi, H. R., "Modeling of non-catalytic gas-solid reactions-Multicomponent nonequimolar counter-diffusion of gaseous phase", Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy 118 (2), pp. 85-97.

  27. Valipour M.S. and Khoshandam B., “Numerical Modeling of Non-isothermal Reduction of a wustite Pellet with Syngas”, Ironmaking and Steelmaking, 36, 91-96, 2009.

  28.  Valipour M.S. and Saboohi Y., “Numerical Investigation of Nonisothermal Reduction of Hematite Using Syngas: The Shaft Scale Study” Modelling and Simulation in Material Science and Engineering, 15, 487-507, 2007.

  29. Valipour M.S. and Saboohi Y., “Modeling of Multiple Noncatalytic Gas- Solid Reactions in a Moving Bed of Porous Pellets Based on Finite Volume Method” Heat and Mass Transfer, 43, 881-894, 2007.

  30. Valipour M.S., Motamed Hashemi M.Y. and Saboohi Y., “Mathematical Modeling of Reaction in an Iron Ore Pellet With Using a Mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: An isothermal study” Advanced Powder Technology, 17(3), 277-295, 2006.

  31.  Valipour M.S. and Saboohi Y., "A non-isothermal, transient model of a non-catalytic reaction in a packed bed with a multi-component high temperature gas mixture" in Computational Fluid and Solid Mechanics 2005(Ed: K.J. Bathe), Elsevier Ltd., pp.1023-1025, 2005.

  32. Saidi, M.H. and Valipour, M.S., "Experimental Modeling of Vortex Tube Refrigerator", J. of Applied Thermal Engineering, Vol.23, pp.1971-1980, 2003.

2011

International Journal papers:

  1. M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2.  M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media, [DOI 10.1007/s11242-015-0483-z].

  3. S. Rashidi, A. Nouri-Borujerdi, M.S. Valipour, R. Ellahi, I. Pop, “Stress-jump and Continuity Interface Conditions for a Cylinder Embedded in a Porous Medium”, Transport in Porous Media, [DOI 10.1007/s11242-014-0431-3].

  4.  M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  5.  M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  6.  M.M. Zolfagharian, M. Rajabi-Zargarabadi, A.S. Mujumdar, M.S. Valipour and M. Asadollahi, “Optimization of Turbine Blade Cooling Using Combined Cooling Techniques”, Engineering Applications of Computational Fluid Mechanics, 8(2014),462-475.

  7. M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

  8. M. Bovand, M.S. Valipour, K. Dincer, S. Eiamsa-ard, “Application of Response Surface Methodology to optimization of a standard RanqueeHilsch vortex tube refrigerator”, Applied Thermal Engineering 67 (2014) 545-553.

  9. S. Rashidi, R. Masoodi, M. Bovand, M.S. Valipour, “Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angles”, International Journal of Numerical Methods for Heat & Fluid Flow, 2014, OnLine-First.

  10. M.S. Valipour, S. Rashidi, M. Bovanda, R. Masoodi " Numerical modeling of flow around and through a porous cylinder with diamond cross-section", European Journal of Mechanics / B Fluids, 46, 74-81.

  11. M. Bovand, M. S. Valipour, K. Dincer, A.Tamayol, " Numerical analysis of the curvature effects on Ranque-Hilsch vortex tube refrigerators", J. of analysis for curved vortex tube optimization”, Int. Commun. Heat Mass Transf., 50 (2014) 98–107.

  12.  M. Dehghan, M.S. Valipour, S. Saedodin, “Perturbation Analysis of the Local Thermal Non-equilibrium Condition in a Fluid-Saturated Porous Medium Bounded by an Iso-thermal Channel”, Transport in Porous Media.

  13. M.S. Valipour, S. Rashidi, R. Masoodi,“ Magnetohydrodynamics Flow and Heat Transfer Around a Solid Cylinder Wrapped With a Porous Ring”, J. Heat Transfer - Transaction ASME.

  14.  S. Rashidi, M. Bovand, I. Pop and· M. S. Valipour, “Numerical Simulation of Forced Convective Heat Transfer Past a Square Diamond-Shaped Porous Cylinder”, Transport in Porous Media, DOI 10.1007/s11242-014-0272-0,

  15. M. Biglari, M.S. Valipour, E. Assareh, M. Nedaei, I. Poultangari “A New Solution for Natural Convection of Darcian Fluid about aVertical Full Cone Embedded in Porous Media Prescribed Wall Temperature” Global Journal of Science, Engineering and Technology (ISSN: 2322-2441)Issue 11, 2013, pp. 10-18

  16.  M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand ,“Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angels”, International Journal of Numerical Methods for Heat and Fluid Flow , Accepted.

  17. M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand, M. Mirhosseini, “A numerical study on convection around a square cylinder using AL2O3–H2O nanofluid”, Journal of Thermal Science, 2013, OnLine-First.

  18. S. Rashidi, A.Tamayol, M.S.Valipour, N.Shokri, “Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring”, International Journal of Heat and Mass Transfer, 63 (2013) 91–100.

  19. Rahbar N., Taherian M., Shateri M., Valipour M.S., “Numerical investigation on flow behavior and energy separation in a micro-scale vortex tube”, Thermal Science 2012 OnLine-First,.

  20. Ghadi A.Z., Goodarzian H., Gorji-Bandpy M., Valipour M.S. “Numerical Investigation of Magnetic Effect on Forced Convection around Two-Dimensional Circular Cylinder Embedded in Porous Media”, Engineering Applications of Computational Fluid Mechanics, 6(3), 395-402.

  21. Valipour M.S., Ghadi A.Z., “Numerical Investigation of Forced Convective Heat Transfer around and through a Porous Circular Cylinder with Internal Heat Generation ”, J. Heat Transfer - Transaction ASME, 134(6).

  22.  M.S. Valipour, M.H. Mokhtari, “Effect of Water Gas Shift Reaction on the Non-Isothermal Reduction of Wustite Porous Pellet Using Syngas”, International Journal of ISSI, 8 (2011), 9-15.

  23. Valipour M.S., Ghadi A.Z., “Numerical investigation of fluid flow and heat transfer around solid circular cylinder utilizing nanofluid”, Int. Commun. Heat Mass Transf., 2011, 38(9), 1296-1304.

  24.  Valipour M.S., Niazi, N., “Experimental modeling of a curved Ranque-Hilsch vortex tube refrigerator”, International Journal of Refrigeration, 2011, 34(4), 1109-1116.

  25.  Valipour M.S. “Mathematical Modelling of a Non-catalytic Gas-Solid Reaction: The Hematite Pellet Reduction with Syngas” Scientia Iranica, Transactions C : Chemistry and Chemical Engineering, 2009, 16, 108-124.

  26. Khoshandam, B., Kumar, R. V., Valipour, M. S. and Darzi, H. R., "Modeling of non-catalytic gas-solid reactions-Multicomponent nonequimolar counter-diffusion of gaseous phase", Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy 118 (2), pp. 85-97.

  27. Valipour M.S. and Khoshandam B., “Numerical Modeling of Non-isothermal Reduction of a wustite Pellet with Syngas”, Ironmaking and Steelmaking, 36, 91-96, 2009.

  28. Valipour M.S. and Saboohi Y., “Numerical Investigation of Nonisothermal Reduction of Hematite Using Syngas: The Shaft Scale Study” Modelling and Simulation in Material Science and Engineering, 15, 487-507, 2007.

  29.  Valipour M.S. and Saboohi Y., “Modeling of Multiple Noncatalytic Gas- Solid Reactions in a Moving Bed of Porous Pellets Based on Finite Volume Method” Heat and Mass Transfer, 43, 881-894, 2007.

  30.  Valipour M.S., Motamed Hashemi M.Y. and Saboohi Y., “Mathematical Modeling of Reaction in an Iron Ore Pellet With Using a Mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: An isothermal study” Advanced Powder Technology, 17(3), 277-295, 2006.

  31.  Valipour M.S. and Saboohi Y., "A non-isothermal, transient model of a non-catalytic reaction in a packed bed with a multi-component high temperature gas mixture" in Computational Fluid and Solid Mechanics 2005(Ed: K.J. Bathe), Elsevier Ltd., pp.1023-1025, 2005.

  32.  Saidi, M.H. and Valipour, M.S., "Experimental Modeling of Vortex Tube Refrigerator", J. of Applied Thermal Engineering, Vol.23, pp.1971-1980, 2003.

2010

International Journal papers:

  1. M. Bovand, S.Rashidi, M.Dehghan, J.A.Esfahani, M.S.Valipour “Control of wake and vortex shedding behind a porous bluff-body by exerting an external magnetic field”, J. of Magnetismand Magnetic Materials.

  2. M. Dehghan, Y. Mahmoudi, M.S. Valipour, S. Saedodin, “Combined Conduction–Convection–Radiation Heat Transfer of Slip Flow Inside a Micro-Channel Filled with a Porous Material”, Transport in Porous Media.

  3. S. Rashidi, A. Nouri-Borujerdi, M.S. Valipour, R. Ellahi, I. Pop, “Stress-jump and Continuity Interface Conditions for a Cylinder Embedded in a Porous Medium”, Transport in Porous Media, [DOI 10.1007/s11242-014-0431-3].

  4. M. Dehghan, M. Daneshipour, M.S. Valipour, R. Rafee, S. Saedodin “Enhancing heat transfer in microchannel heat sinks using converging flow passages”, Energy Conversion and Management, 92 (2015) 244–250.

  5. M. Dehghan, M.S. Valipour , S. Saedodin “Temperature-dependent conductivity in forced convection of heatexchangers filled with porous media: A perturbation solution”, Energy Conversion and Management, 91 (2015) 259–266.

  6. M.M. Zolfagharian, M. Rajabi-Zargarabadi, A.S. Mujumdar, M.S. Valipour and M. Asadollahi, “Optimization of Turbine Blade Cooling Using Combined Cooling Techniques”, Engineering Applications of Computational Fluid Mechanics, 8(2014),462-475.

  7.  M. Dehghan, Y. Rahmani, D. D. Ganji, S. Saedodin, M.S. Valipour, S. Rashidi, “Convectioneradiation heat transfer in solar heat exchangers filled with a porous medium: Homotopy perturbation method versus numerical analysis ”, Renewable Energy 74 (2015) 448-455.

  8.  M. Bovand, M.S. Valipour, K. Dincer, S. Eiamsa-ard, “Application of Response Surface Methodology to optimization of a standard RanqueeHilsch vortex tube refrigerator”, Applied Thermal Engineering 67 (2014) 545-553.

  9.  S. Rashidi, R. Masoodi, M. Bovand, M.S. Valipour, “Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angles”, International Journal of Numerical Methods for Heat & Fluid Flow, 2014, OnLine-First.

  10.  M.S. Valipour, S. Rashidi, M. Bovanda, R. Masoodi " Numerical modeling of flow around and through a porous cylinder with diamond cross-section", European Journal of Mechanics / B Fluids, 46, 74-81.

  11.  M. Bovand, M. S. Valipour, K. Dincer, A.Tamayol, " Numerical analysis of the curvature effects on Ranque-Hilsch vortex tube refrigerators", J. of analysis for curved vortex tube optimization”, Int. Commun. Heat Mass Transf., 50 (2014) 98–107.

  12.  M. Dehghan, M.S. Valipour, S. Saedodin, “Perturbation Analysis of the Local Thermal Non-equilibrium Condition in a Fluid-Saturated Porous Medium Bounded by an Iso-thermal Channel”, Transport in Porous Media.

  13. M.S. Valipour, S. Rashidi, R. Masoodi,“ Magnetohydrodynamics Flow and Heat Transfer Around a Solid Cylinder Wrapped With a Porous Ring”, J. Heat Transfer - Transaction ASME.

  14.  S. Rashidi, M. Bovand, I. Pop and· M. S. Valipour, “Numerical Simulation of Forced Convective Heat Transfer Past a Square Diamond-Shaped Porous Cylinder”, Transport in Porous Media, DOI 10.1007/s11242-014-0272-0,

  15. M. Biglari, M.S. Valipour, E. Assareh, M. Nedaei, I. Poultangari “A New Solution for Natural Convection of Darcian Fluid about aVertical Full Cone Embedded in Porous Media Prescribed Wall Temperature” Global Journal of Science, Engineering and Technology (ISSN: 2322-2441)Issue 11, 2013, pp. 10-18

  16. M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand ,“Numerical Study of Flow around and through a Porous Diamond Cylinder in Different Apex Angels”, International Journal of Numerical Methods for Heat and Fluid Flow , Accepted.

  17.  M.S. Valipour, R. Masoodi, S. Rashidi, M. Bovand, M. Mirhosseini, “A numerical study on convection around a square cylinder using AL2O3–H2O nanofluid”, Journal of Thermal Science, 2013, OnLine-First.

  18. S. Rashidi, A.Tamayol, M.S.Valipour, N.Shokri, “Fluid flow and forced convection heat transfer around a solid cylinder wrapped with a porous ring”, International Journal of Heat and Mass Transfer, 63 (2013) 91–100.

  19. Rahbar N., Taherian M., Shateri M., Valipour M.S., “Numerical investigation on flow behavior and energy separation in a micro-scale vortex tube”, Thermal Science 2012 OnLine-First, 

  20.  Ghadi A.Z., Goodarzian H., Gorji-Bandpy M., Valipour M.S. “Numerical Investigation of Magnetic Effect on Forced Convection around Two-Dimensional Circular Cylinder Embedded in Porous Media”, Engineering Applications of Computational Fluid Mechanics, 6(3), 395-402.

  21. Valipour M.S., Ghadi A.Z., “Numerical Investigation of Forced Convective Heat Transfer around and through a Porous Circular Cylinder with Internal Heat Generation ”, J. Heat Transfer - Transaction ASME, 134(6).

  22.  M.S. Valipour, M.H. Mokhtari, “Effect of Water Gas Shift Reaction on the Non-Isothermal Reduction of Wustite Porous Pellet Using Syngas”, International Journal of ISSI, 8 (2011), 9-15.

  23. Valipour M.S., Ghadi A.Z., “Numerical investigation of fluid flow and heat transfer around solid circular cylinder utilizing nanofluid”, Int. Commun. Heat Mass Transf., 2011, 38(9), 1296-1304.

  24.  Valipour M.S., Niazi, N., “Experimental modeling of a curved Ranque-Hilsch vortex tube refrigerator”, International Journal of Refrigeration, 2011, 34(4), 1109-1116.

  25.  Valipour M.S. “Mathematical Modelling of a Non-catalytic Gas-Solid Reaction: The Hematite Pellet Reduction with Syngas” Scientia Iranica, Transactions C : Chemistry and Chemical Engineering, 2009, 16, 108-124.

  26. Khoshandam, B., Kumar, R. V., Valipour, M. S. and Darzi, H. R., "Modeling of non-catalytic gas-solid reactions-Multicomponent nonequimolar counter-diffusion of gaseous phase", Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy 118 (2), pp. 85-97.

  27.  Valipour M.S. and Khoshandam B., “Numerical Modeling of Non-isothermal Reduction of a wustite Pellet with Syngas”, Ironmaking and Steelmaking, 36, 91-96, 2009.

  28. Valipour M.S. and Saboohi Y., “Numerical Investigation of Nonisothermal Reduction of Hematite Using Syngas: The Shaft Scale Study” Modelling and Simulation in Material Science and Engineering, 15, 487-507, 2007.

  29. Valipour M.S. and Saboohi Y., “Modeling of Multiple Noncatalytic Gas- Solid Reactions in a Moving Bed of Porous Pellets Based on Finite Volume Method” Heat and Mass Transfer, 43, 881-894, 2007.

  30.  Valipour M.S., Motamed Hashemi M.Y. and Saboohi Y., “Mathematical Modeling of Reaction in an Iron Ore Pellet With Using a Mixture of hydrogen, water vapor, carbon monoxide and carbon dioxide: An isothermal study” Advanced Powder Technology, 17(3), 277-295, 2006.

  31. Valipour M.S. and Saboohi Y., "A non-isothermal, transient model of a non-catalytic reaction in a packed bed with a multi-component high temperature gas mixture" in Computational Fluid and Solid Mechanics 2005(Ed: K.J. Bathe), Elsevier Ltd., pp.1023-1025, 2005.

  32.  Saidi, M.H. and Valipour, M.S., "Experimental Modeling of Vortex Tube Refrigerator", J. of Applied Thermal Engineering, Vol.23, pp.1971-1980, 2003.